Can the FoE Channel network in a WAN configuration be a routed VLAN?
My question is about the requirements for the channel network in a WAN configuration.I'd like to setup the FoE engine to failover to a server in a co-location site that is primarily connected to HQ via...
View ArticleWAN Public IP blockage
I have the FOE server setup and replicating. I have tested it and it is working great. However I need to setup split brain avoidance. In order to do so, I want to ping the public IP of the Primary and...
View ArticleClik here to view.
FOE Active Failed (Time out)
Hi all, The primary and secondary servers have been created and check them statuses like normally.but I want to try test and make active to the secondary server. FOE can't be activated secondary...
View ArticleHow should i configure my/customer's monitored devices in an across the WAN...
How should i configure my/customer's monitored devices in an WAN FOE environment? What do i need to configure in the monitored devices in an across the wan foe instalationsnmp config, wmi config, nta...
View ArticleFOE Details
We have installed a FOE on our server long back and now we missed the login credentials and ip address of the FOE installed on my server.where can i find the details for FOE installed on my server
View ArticleInstalling *new* Applications once FOE is alreaady installed.
Morning allhttp://knowledgebase.solarwinds.com/kb/questions/1480/How+to+Upgrade+SolarWinds+Orion+when+Orion+Failover+Engine+is+Installed I've read the above link to upgrading existing applications...
View ArticleFirst time installing FoE, need advice please!
I am about to attempt to install FoE on two pollers and an additional web server for the first time. I know there is documentation, but since SW documentation is not always very thorough, I wanted to...
View ArticleHow should i configure my/customer's monitored devices in an across the WAN...
How should i configure my/customer's monitored devices in an WAN FOE environment? What do i need to configure in the monitored devices in an across the wan foe instalationsnmp config, wmi config, nta...
View ArticleFailover Engine LAN vs WAN
HiWe have 2 Data center i can run WAN or LAN to the server.Any budy try setup LAN and WAN scenario?I can understand that when you run the WAN setup there isn't 1 "public IP/DNS" to the 2 servers.Is...
View ArticleFailover Engine and data/application protection
Hello,I have a Solarwinds NCM 7.1.1 working with Orion Failover Engine 6.7 on two nodes (primary and secondary). I have to show my client a few tests which include data/application protection.My...
View ArticleNeed basic questions answered about Orion functions in a scaled environment
I have current versions of numerous SolarWinds applications (NPM, NCM, SAM, VNQM, UDT, WPM) installed on three polling engines. I have been combing through what I hope is the updated literature trying...
View ArticleSolarWinds Failover with Infoblox DNS
Wish to know if anyone has implemented SolarWinds Failover with Infoblox DNS before. If yes, I appreciate if you could share some pointers.
View ArticleWAN Public IP blockage
I have the FOE server setup and replicating. I have tested it and it is working great. However I need to setup split brain avoidance. In order to do so, I want to ping the public IP of the Primary and...
View ArticleAdditional poller port requirements
Hello, Could someone please verify for me the below is correct in regards to port requirements for an Additional Poller. - Bidirectional communication on TCP port 17777 between the Primary NPM server...
View ArticleUnable to protect service FTPSVC because Service FTPSVC was not found on...
Hi,We're seeing a few entries in our log files for services which aren't running, e.g.Unable to protect service FTPSVC because Service FTPSVC was not found on computer '.'.How can we stop it trying to...
View ArticleFailover Engine and PageGate
Hi All,Shortly I'll be installing the FoE on a new 2008 R2 server in our NPM/NCM/IPSLA environment. In preparation I need to purchase the appropriate PageGate licenses. My question is, do I need to...
View ArticleFoE - failover updating DNS entry for primary server - can we use an alias...
Hi all,We're working through the FoE setup at the moment using the WAN option with active system in one data center and our DR system in another data center. Obviously with the WAN setup you cannot...
View ArticleCan the FoE Channel network in a WAN configuration be a routed VLAN?
My question is about the requirements for the channel network in a WAN configuration.I'd like to setup the FoE engine to failover to a server in a co-location site that is primarily connected to HQ via...
View ArticleDocs for FoE acceptance testing
I am new to Failover Engine, and am trying to compile a "how to" document for acceptance testing. Does SolarWinds have such a concise document already? Where can I read about the types of tasks that I...
View ArticleSolarwinds FoE and Syncing Routes
We have a VPN tunnel that allows us to probe our clients private networks over this tunnel so we have routes built into the server to allow the traffic to flow out the proper interface. Is there a way...
View Article